QuickLabel Systems QLS-4100X Einstellungsanleitung PDF herunterladen (Seite 22)

QLS-4100 X 22

Utility Port Connection

On the rear panel of the printer, the Utility Port permits connection to external

devices such as the optional QuickLabel Systems Cutter and Cutter/Stacker or

a label applicator system. The assignment of pin functions on the utility port

depends on the mode of operation. For additional information regarding

applicator mode operation, please contact QuickLabel Systems.

Standard Mode

Pin Signal Notes

1 N/C

2 Ground

3 Cutter On/Off Output (1=on 0=off)

4 5 VDC 1A max

5 Cutter Error Input (1=error 0=no error)

6 Cutter Pulse ~ 500 nsec pulse output

7 N/C

8 Pause Input (1=print 0=pause)

9 Error

Applicator Mode

Pin Signal Notes

1 N/C

2 Ground

3 Printing Output (1=printing)

4 N/C

5 N/C

6 N/C

7 N/C

8 Go Input (1=initiate print)

9 Skip/Apply Output (1=apply 0=skip)

Note

If you are using a cutter or cutter/stacker, refer to the unit’s setup and

operation manual for information on setting up the unit with your printer.

Warning

Exceeding the limits of the utility port signals can result in damage to the

printer.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 117 118

Keine Kommentare

QuickLabel Systems QLS-4100X Einstellungsanleitung Seite 22